How to inspect turbo charger

How to inspect turbo charger of Hyundai terracan

2004  D 2.5 TCI  Turbo Charger

INSPECTION Auto repair and Study guide

1. Check the inner housing contacting turbine wheel for crack, pitching and other damages caused by overheat.

2. Make sure that the waste gate valve lever operates freely by hands.

3. Make sure there are no damages on the inner housing surface contacting compressor wheel.

4. Turbine wheel and shaft assemblies with cracks in the blades or broken blades can not be used again. If the blades are slightly bent, it can be usedagain but severely bent blades can not be reused.

5. Check if there are foreign materials disturbing the oil flow in the oil passage of cartridge assembly.

WASTE GATE INSPECTION (Auto repair and Study guide

1. Check the waste gate rod operation under the pressure below.

Nominal Value : 77.5 kPa (0.79 kgf / cm²)

more Auto repair and Study guide

Check my site

How to repair engine noise from Hyundai Terracan

How to repair engine noise from Hyundai Terracan

 

Auto repair and Study guide.

Give’s you Some of my actual experience on field Auto repair and Study guide as Trouble shooter.you can leave your comment or you are free to leave Question regarding on your own car if there is a problem.

 

Study guide Model: Hyundai Terracan(HP).

Study guide and Year Model:2004

Fuel: Diesel

Auto repair Displacement:2500cc

Auto repair and Study guide Subject: Abnormal engine noise – Turbo charger

 

1) Condition

1. When the engine is cold abnormal noise occur.

2) Cause

• Malfunction in turbo charger.

3) Diagnosis

1. The noise is similar to the front exhaust pipe noise.
2. The noise occurs from the turbo charger.
3. Remove the turbo charger from the engine.
4.  Metal clips in the turbo charger are found.
5. The piece of parts from the turbo charger assembly is out of order.

   2004  D 2.5 TCI  Turbo Charger

   COMPONENTS

   

4) Repair Guide

1. Replace the turbo charger.
2. Auto repair , Study guide , Auto repair , Study guide , Auto repair , ,Study guide

more case and trouble.

How to Repair the Abnormal Tachometer

How to Repair the Abnormal Tachometer
Model: Hyundai Terracan(HP)

Year Model: 2004

Fuel: Gasoline

Displacement: 2500cc

Subject: Abnormal tachometer-Crank Angle Sensor.

1) Condition

1. Intermittent engine stalling.
2. During driving,intermittently the tachometer fails to operate.

2) Cause

= The result of NP sensor connector inspection is revealed that the connector has been in abnormal condition.

3) Diagnosis

1. Scan tool check.
   = Diagnostic trouble code
   a) P1127 – Control sleeve position sensor malfunction.
   b) P0120 =- Accel position sensor malfunction..
   c) P1120 – Electric Governor malfunction.
2. Check the contact of EE04 connector (near the starter) because the present state of DTC related to EE04 is in the trouble code.
3. The poor contact of EE04 connector is found.

4) Parts Repair

1. Repair the GE connector and NP sensor pin.(at the same location beside the starter)

more case & please leave a comment