2009 Hyundai Azera G 3.3 DOHC > Accelerator Position Sensor (APS)
DESCRIPTION
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine control system, so it consists of the two sensors which adapt individual sensor power and ground line. The second sensor monitors the first sensor and its output voltage is half of the first one. If the ratio of the sensor 1 and 2 is out of the range (approximately 1/2), the diagnostic system judges that it is abnormal.
SPECIFICATION
Pedal Position
Output Voltage (V) [Vref = 5.0V]
APS1
APS2
C.T
0.7 ~ 0.8V
0.29 ~ 0.46V
W.O.T
3.85 ~ 4.35V
1.93 ~ 2.18V
Item
Sensor Resistance
APS1
0.7 ~ 1.3kΩ at 20°C (68°F)
APS2
1.4 ~ 2.6kΩ at 20°C (68°F)
SCHEMATIC DIAGRAM
0 comments:
Post a Comment