How to repair and check the ignition coil of trajet
Model:Hyundai Trajet
Year Model: 2006
Fuel :Gasoline
Subject: How to repair and check the ignition coil.
2007 G 2.7 V6 DOHC Engine Electrical System
IGNITION COIL (2.7L V6 ENGINE)
1.
Measurement of the primary coil resistance(Techatblog.com)
Measure the resistance between connector terminals 1 and 2 (the coils at the No. 3 and No. 6 cylinder sides) of the ignition coil, and between terminals 2 and 4 (the coils at the No. 1 and No. 4 cylinder sides), and between terminals2 and 3 (the coils at the No.2 and No.5 cylinder sides).
2.
From TechatBlog.com Measurement of the secondary coil resistance
Measure the resistance between the high-voltage terminal for the No. 3 and No. 6 cylinders, between the high-voltage terminals for the No. 1 and No. 4 cylinders and between the high-voltage terminals for the No.2 and No.5cylinders.
When measuring the resistance of the secondary coil, be sure to disconnect the connector of the ignition coil.
IGNITION COIL (2.0 I4 Engine : Power Transistor Bulilt-in)
1.
Measurement of the primary coil resistance
Connect the negative (-) terminal of a 3V power supply to terminal 2 of the power transistor; then check whether there is continuity between terminal 3 and terminal 2 when terminal 1 and the positive (+) terminal are connectedand disconnected.
Terminal 3 and (+) terminal
Terminal 1 and (+) terminal 2
Connected
Continuity (Approximately 0.86Ω)
Disconnected
Non continuity
2.
Measurement of the secondary coil resistance
Measure the resistance between the high-voltage terminals of the ignition coil.
0 comments:
Post a Comment